The decay is due to the spacer thickness influence and due to the

The decay is due to the spacer thickness influence and due to the absence of CHEM input (if any in the present case). At the same time, the spacer protects the MIF providing its longer time stability. The increase in MIF density, that is, in size and in surface concentration of nanoislands, should result in

a higher SERS signal (Figure 6). This is because of (a) the increase of the cross section of the nanoisland-analyte interaction due to a geometrical factor, that is, the increase of the effective area of the MIF, and (b) the surface concentration of ‘hot spots’ which are supposed to be the main origin of extremely high SERS signals [30, 31]. This can be easily seen in Figure 6a where a denser film provides check details higher I Raman. At the same time, the increase in the size of nanoislands, indicated by the redshift of the SPR (Figure 4), and their coagulation definitely result in the slowing of the spatial decay of the SPR electric field with the spacer thickness. Figures 7 and 8, where one can see that the Raman signal decay with the spacer thickness is slower for the denser film, clearly illustrate this. This

phenomenon can be very roughly explained through the increase in the effective size of nanoislands d, but its detailed description will definitely require accounting for peculiarities related to the redistribution of local SPR fields in the partly aggregated MIF [32]. It is worth to note that thicker TiO2 films, corresponding to full decay of the local electric field Bacterial neuraminidase within the spacer, exclude SERS-related click here applications of the MIFs. However, they can be effectively used in applications which do not require the use of the tail of the electric field outside the film. Examples of such applications include tuning of optical absorption spectra, enhancement of resonant luminescence of emitters embedded into the film, and tuning the wavelength

range of optical nonlinearity. Conclusions The performed studies demonstrate that silver nanoisland films formed using out-diffusion of silver from glass substrates during thermal processing in hydrogen atmosphere can be effectively used in SERS measurements. The enhancement of the Raman signal increases with the HDAC inhibitor density of the nanoisland film. The surface profile of dielectrics deposited upon the MIF using the ALD technique replicates the profile of the initial MIF, and the smoothing of the dielectric surface profile with the deposited thickness is rather slow except for the smallest gaps between the nanoislands. The deposition of a titanium dioxide film results in a redshift of the SPR wavelength relative to the SPR wavelength of the initial film. This shift is up to hundred nanometers allowing the tuning of the central wavelength of the SPR. The shift saturates at a titania film thickness of 40 to 50 nm. SERS experiments performed with a R6G probe show that the SPR field spatial decay is less for denser MIFs, that is, for these MIFs, the titania spacer can be thicker.

Comments are closed.